1973 Chrysler Tilt Floor Shift Steering Column with id.CLASSIC Ignition - Paintable Paintable Steel
This retrofit column is designed to fit your Chrylser B-Body and does NOT require modification to your original vehicle to install. ididit's 1973 Chrysler B-Body tilt column will bolt right in to your manual box, power box (with a rag joint) or rack & pinion system. These columns are fully collapsible and come complete with a model specific floor mount, wiring adaptor, and the provisions for mounting brackets. Simply remove your old column, saving your original under dash mount. For quick and easy installation, use an ididit installation kit and install your new steering column in place of the old. Using an adaptor, add an aftermarket wheel and the gripping surface of the new wheel will be in the same location as the original. Standard features include 8-position tilt, ignition, self-canceling turn signals, 4-way flashers, wiring plug, knobs and levers, collapsible, wiring harness adaptor, and a 3/4" DD extendable lower shaft.
This column has an 3/4"DD extendable lower shaft that allows you to adjust the column length to fit your manual box, power box or rack & pinion system. If you are using an aftermarket steering box, please call ididit for further information.
Upgrade Your Ignition
Forget the key and go keyless with id.PUSH. Replace id.CLASSIC with id.PUSH at no additional cost. Add Part # 1000000063 when ordering your column.
Secure your ride and upgrade your ignition to id.PUSH+ for only $540. Add Part # 1000000065 when ordering your column.
Get the most elite keyless system on the market with id.TOUCH. An easy upgrade to your ignition for only $740. Add Part # 1000000071 when ordering your column.
- Item Requires Shipping
- 18.0 lbs.
- W8.2500” x H5.7500” x L45.5000”