1965-66 Mustang Tilt Floor Shift Ford Based w/Rack Steering Column - Chrome
Are you a Mustang Fan? Then, these Ford Style column are for you! They feature all Ford wiring and a Ford top shaft. The rack version is made 1" shorter in order to lessen the angle of the U-joint when bolted into your rack & pinion system. To install, simply remove your old column, saving your original under dash mount. A new column specific floor mount is included with every column and is designed to fit your application. The 1965-66 column has a collapsible inner shaft. Add your stock Mustang wheel and the gripping surface will be in the same location as the original.
1965-66 Rack & Pinion
3/4"DD x 3/4"-36 U-Joint
Part # 3000013449
Part # 3000409418
Manual Rack will also need a 3/4"DD x ? U-Joint (depending on manufacturers input shaft). Power Rack will also need a 3/4"DD x ? Vibration Joint (depending on manufacturers input shaft)
Please Note: When installing your OEM steering wheel to your ididit Ford Style Retrofit Column, the OEM wheel must be for the same year application as the column. Use of a different year WILL result in damage to the turn signal switch.
The 1965-66 ididit Mustang column is not compatible with the 1965-66 factory Rally Pac gauge cluster.
If using a Borgeson power assisted box on any year Mustang, the column will need to be shorter (will not work for 1969 ididit columns.) Give us a call for additional information.
- Item Requires Shipping