Standard Features :
Self-Canceling Turn Signals
4-Way Flashers
Knobs and Handles
3 7/8" Wiring Plug
GM Style: 3/4" 36 Lower Shaft
Ford Style: 3/4" DD Telescoping Shaft*
Available Finishes: Paintable Steel, Chrome Plated Steel, Black Powder Coat, Brushed Aluminum, Polished Aluminum
Steering Wheel Bolt Patterns Available: 3, 5, 6, 9 Bolt

Recommended Accessories
Installation Kit
Part numbers
Ford Style Installation Instructions

GM Style 1967-72 Ford Paintable Steel
Tilt Floor Shift- 1170730010

Part numbers

1967-72 Ford Paintable Steel Welded Tabs

Ford Style 1967-72 Ford Paintable Steel
Tilt Floor Shift- 1170735010

Part numbers

GM Style: Add the convenience and reliability of a new column built specific for your Ford Truck. This steering column is not a universal column that requires modification of your original vehicle to install. Simply remove your old column, saving your original underdash mount as well as the original floor mount. Using one of our installation kits (see table below), install your new steering column in place of the old. Add an aftermarket wheel and the gripping surface of the new wheel will be in the same location as the original.

Ford Style: The All New Floor Shift Ford Top Shaft and Ford Wiring Steering Columns for 1973-77 Ford Trucks are here!  These brand new All Ford columns are a direct bolt in and connects to your Stock Box or Rack.  Standard features of these 1973-77 All Ford Steering Columns are 100% American Made, 8-Position Tilt, Ford Top Shaft so you can attach your Stock Ford Steering Wheel on top and Ford Wiring.  Available finishes include Paintable Steel, Chrome and Black Powder Coated.  Don’t let your 1967-72 Ford Truck go without one of these Made to Fit Steering Columns! *The 1965-77 Ford Style Steering Columns have a 3/4" DD Telescoping Output Shaft. These specific columns were designed this way for different styles of boxes or installations. The shaft now can be pulled out to the desired length without cutting or grinding.

Part numbers...

Tilt and column shift columns are now available in a variety of finishes. The column will have a 3/4” 36 lower shaft. The female side of the plug found on our column is included. The wires will simply need to be matched by function rather than color. An under-dash mount is welded to the column to match the bolt pattern of the original. A new rag joint is required between the column and the gearbox.

Note: Please note that the Bendix box was frequently interchanged with the Saginaw box as a replacement. This will require a different length column.

Installation Kit Includes:
No specific installation kit is assembled due to variations in installation. Please see below pieces that come with purchase of column and pieces that are popular to the installation of this column.
(Installation Kits are sold separately) .

3/4" 36x3/4" 36
Part number:
3000053434

A vibration reducer used between your steering column and gearbox.
(Installations may vary)
(Not included with purchase of column)