Mon - Fri 8:00am - 6:00pm ET

(517) 424 - 0577

100% American Made!
Our Products >> Retrofit Columns >> 1947-78 Chevy Truck - Tilt Column Shift
Chrome 1947-54 Chevy Truck tilt column shift steering column
Find a Dealer Contact Us!
1947-78 Chevy Truck - Tilt Column Shift

Retrofit Series

We've got a wide selection of columns designed to fit your classic GM Truck! Each Chevy Truck column installs in the same location as the old and includes everything you'll need for flawless installation. All that's required is an ididit installation kit. 1947-54 Chevy Truck columns come complete with a new under dash mount and floor mount. The 1955-59 column comes with it's own specially designed under dash mount and floor mount with gasket, as well as an OE gearbox cover that is designed to protect the original gearbox from dirt and debris. Use your original under dash mount and floor mount to install the 1960-66 column. These columns also come with unique dash locating slots that allow for perfect installation every time. We offer both a standard and rack column for the 1960-72 Chevy Truck. The standard column will bolt right to your stock box (with a u-joint). The rack version is made shorter to lessen the angle of the u-joints. 1967-78 columns all install simply by using the original under dash mount and floor mount. All of our Chevy truck column shift columns come complete with a neutral safety switch (shift indicator not included). The shift pattern on the column allows you to use either a 3 or 4-speed automatic transmission. A shift linkage (new or original) is required for installation and will attach to the lower shift arm provided on the column. Using an adaptor, add an aftermarket wheel and the gripping surface will be in the same location as the stock wheel. You can bolt your original 1973-78 steering wheel directly to the 1973-78 steering column, no adaptor required!

Please Note: The 1947-54 column does NOT come with a neutral safety switch or shift indicator. Call ididit for info on adding.

A stock 1960-66 wheel can NOT be used with a 1960-66 ididit column.

  Paintable Steel Chrome Black Powder Coated Brushed Aluminum Polished Aluminum
1947-54 1130651010 1130651020 1130651051 1150651030 1150651040
1955-59 1140652010 1140652020 1140652051 1150652030 1150652040
1960-66 1140650010 1140650020 1140650051 1150650030 1150650040
1960-66 w/Rack 1140650110 1140650120 1140650151 N/A N/A
1967-72 1140657010 1140657020 1140657051 1150657030 1150657040
1967-72 w/Rack 1140658010 1140658020 1140658051 1150658030 1150658040
1973-78 w/Key 1540760010 1540760020 1540760051 N/A N/A
Standard Features

8-Position Tilt
Ignition & Relay Pack (1973-78 only)
Self-Canceling Turn Signals
4-Way Flashers
Knobs & Levers (1955-59 includes Retro Style Knobs & Levers)
Locating Slot & Brackets (1960-60 only)
Neutral Safety Switch (1947-54 does NOT include NSS)
3 7/8" Wiring Plug
1973-78: 4 1/4" Wiring Plug
1947-59: 1" DD Lower Shaft
1960-72: 3/4"-36 Lower Shaft
1973-78: 1"-48 Lower Shaft
1967-72 columns include a Wiring Harness Adaptor

Steering Wheel Adaptor Required (for Aftermarket Wheel)
1969 or Newer GM Passenger Car
3, 5, 6, and 9 Bolt patterns available

Accessories & Add-Ons

What you'll need to install column
The 1960-78 column is designed to use the original under dash mount and floor mount. 1947-54 columns come with a new ididit under dash and floor mount. 1955-59 columns come with a new ididit under dash mount, a floor mount with gasket and a delrin OE gearbox cover.
*Click on the Installation Kit link below to find the appropriate installation kit

Enhancing your column
Steering Wheel Adaptor
Adapt your original steering wheel with the 1955-68 Horn Kit with Ring
Cruise Control
Dimmer/Wiper Kit
Add keyed ignition or upgrade to Touch-N-Go Start keyless ignition (not available in aluminum finishes)

Finishing the installation
Installation Kits
Cable Shift Linkage Kit
Shift Indicator

1967-72 Paintable Steel Finish

1973-78 Chrome Finish