1976-77 Ford Bronco Tilt Column Shift Steering Column - Paintable Steel
This retrofit column is designed to fit your Bronco and does NOT require modification to your original vehicle to install. This Ford Style column features all Ford wiring and a Ford top shaft and will bolt to your stock box. Simply remove your old column, saving your original floor mount. For flawless installation, a pre-welded underdash mount comes standard with every column. Using an ididit installation kit, install your new steering column in place of the old. Add your stock Bronco wheel directly to the column and the gripping surface will be in the same location as the original. Available in tilt floor shift or tilt column shift versions. The shift pattern on the column shift column allows you to use either a 3 or 4-speed automatic transmission and utilizes the original transmission mounted neutral safety switch. A gear shift indicator is an option, but not included. A shift linkage (new or original) is required for installation and will attach to the lower shift arm provided on the column.
INSTALLATION KITS (all the required components needed for flawless installation)
Includes 3/4"-36 Half Rag Joint
A new half rag joint is required for installation. The original rag joint was pressed onto the original column and cannot be removed.
Includes replacement rubber disk for Rag Joint
Before installing, carefully inspect the rubber on the other half of the original rag joint to be sure it is all intact. If it is not, you will need to use this replacement.
Includes 3/4"-36 x 3/4"-36 Rag Joint
- Item Requires Shipping
- 18.5 lbs.
- W6.0000” x H8.2500” x L45.5000”